gas powered remote control helicopters

This article has been modified slightly from it's original form to better fit this site. The original article was written by Shane Kent (on http://thegreenbutton.com as"Shakey1980") and has been used with his permission.
Please note that the "IR Codes, ReportMappingTable, and Input.inf" section contains many tables that may not translate well to the formatting of this page. The original tables are availble for download as a PDF here or at the bottom of this guide.
This article is not for basic users, and much of what is covered in this article is for intermediate to advanced computer users. The INPUT.INF file entries discussed in this article are for Media Center 2005 and Vista Premium or Ultimate. All versions of Windows have the INPUT.INF file, but they have different versions. The Media Center INPUT.INF file has settings for mapping Remote Control buttons to Windows and Media Center functionality. And additional buttons can be mapped to functions not standard to Media Center remotes. Such as using an Xbox 360 Universal Remote and gaining access to the extra buttons. The entries pointed out in the INPUT.INF file are for Media Center IR6 remotes and do not apply to RF remotes. The Xbox 360 Universal Media Remote is an IR6 based remote compatible with the Media Center IR receiver.
Not a lot of INF knowledge required for what is outlined in this article. The INF file contents needed are listed in this article to copy and paste to notepad. Be sure to remember when saving from notepad to set the File Type to All Files and type in the .INF at the end of the file name.
Editing the registry directly (REGEDIT) is more time consuming should your settings get lost on a Windows re-install, device re-install, update or service pack. Creating INF files allows you to restore your customizations easily as well as share them with others. The Registry Editor is capable of exporting changes to a file, but this is not as graceful as using a single INF file to create, review, install and save your customizations. The INF file also offers more structure and definition than a REG file. Do not rush creating INF files and be sure to double check your work. The Registry Editor exports are handy for backing up the registry when testing INF files. In fact you should always create a Restore Point or at least a Registry Export file before testing INF files.
Beware that Microsoft could update Windows and render this article obsolete by changing the way their drivers or Media Center operates. However, MS changing is unlikely, as this was tested on Windows Vista Ultimate x64 (without and with SP1) and is the same on Vista x86 and Media Center 2005 (Media Center 2005 with updates).

Infrared Transceiver
a.k.a. "Beanbag IR Receiver" or "Remote Sensor" or "MCE IR"
Uses: Philips RC6 IR Protocol and MCIR Protocol
Requires: MCE 2005 (with update) or Vista MC
Features: Two IR Emitter ports for Infrared Transmitter - IR Emitters control a Set Top Box or Satellite Receiver. IR Emitter also known as IR Blaster.
Remote Control
Microsoft MCE 2005 Remote (Version 2)
41 Buttons
Version 2a of the MCE Remote has 4 color buttons
Button not on Xbox 360 Universal Media Remote:
-Recorded TV
Typically this remote comes bundled with the eHome Transceiver for MCE.
RC6 Infrared

Infrared Transceiver
The HP Transceiver is for all intensive purposes identical to the Microsoft Transceiver.
Installs as the eHome Infrared in Device Manager, same as the Microsoft Transceiver.
Two IR Emitter ports for Infrared Transmitter.
Remote Control
HP Windows Vista Premium Remote
As with the Microsoft remote, various HP models exist. This is the Vista Premium # 2 (number 2 and not version 2).
49 Buttons
RC6 Infrared

RF Receiver
The Gyration Receiver is radically different from the MS and HP Transceivers. The main difference is the Gyration is RF (Radio Frequency) and not IR (Infrared). The Gyration Receiver works with various Windows versions and not just Media Center equipped versions.
Much of what is discussed in this document does not apply to the Gyration remote. The INF file entries discussed are for eHome IR remotes (such as the MS and HP Media Center remotes) and not the Gyration RF remote.
The Gyration does not support IR Blasters. However, the remote is programmable to control various IR devices.
The Gyration Remote doubles as a mouse and operates using standard Windows HID (Human Interface Device) drivers.
Remote Control
The Gyration remote is RF and IR, RF for the PC and IR for other devices. IR for other devices such as a Set Top Box.
54 Buttons, but some are for controller itself. Such as 4 buttons to select RF or one of three IR modes, and 1 button is the RF connect button to connect to the RF receiver.
The Gyration remote does not require a direct line of sight, and operates at a further range than the IR remotes. The Gyration does not require eHome drivers from the Media Center editions of Windows. It is a superior remote, but at a much higher retail cost than the other hand held remotes pointed out in this article.

Buttons not on MCE Version 2 Remote:
Open / Close
Silver X
Blue X
Green A
Display
Title
46 Buttons. Does not have MCE button for Recorded TV but does have Live TV, Guide and other MCE buttons.
The 4 colored buttons are not the same as the 4 colored buttons on the MCE Version 2a remote.
The MS Xbox 360 remote has good size of buttons, a nice feel, and the eject button as well as other buttons to map functions to. It requires the eHome receiver, a direct line of site, creating INF files, lacks the mouse and the distance of the Gyration, but for me the Xbox 360 remote is the best Media Center remote. I could not say the same for all Media Center users though.
RC6 Infrared

Media Center 2005 with required updates or Vista Media Center
3 in 1 with Keyboard, Mouse and Remote
eHome MCIR 109 Keyboard. Note that this is an eHome Remote, and not a typical keyboard and will not operate outside of Media Center editions of Windows. No pressing Del to enter BIOS, no BIOS with this keyboard, no boot diskettes, etc. This does not mean this device could not be made to work on Linux or that it could not be hacked onto a non Media Center Windows, but talking about the designed purpose.
Typically the remote keyboard does not include the eHome Transceiver for MCE.
RC6 Infrared
Gyration makes a similar remote keyboard, it is however RF based where the MCE 2005 Keyboard is IR based. MCE 2005 Keyboard requires the eHome drivers supplied with Media Center editions of Windows. This keyboard has a nice feel to it, but the mouse is difficult to operate.

Much like the Gyration Remote, the Wireless Entertainment Desktop keyboard has similar functionality to other remotes discussed in this document. And like the Gyration Remote the Wireless Entertainment 7000 is not IR based and does not use the eHome drivers. The Wireless Entertainment 7000 works with various versions of Windows, not just Media Center editions, and uses standard HID (Human Interface Device) drivers. So the INF entries discussed in this document do not apply to Wireless Entertainment 7000 keyboard just as they do not apply to the Gyration Remote. Unlike the Media Center Remote Keyboard the Wireless Entertainment 7000 Keyboard operates like a standard USB keyboard as well as a Media Center remote.
The reason I point out Wireless Entertainment 7000 and the Gyration even though they are not covered by the INF entries is that they are Media Center remotes just the same. To show there are many Media Center remotes and that some are eHome IR remotes and that others are Radio Frequency remotes and not subject to the same INF entries. The Media Center eHome infrared remotes are based on Philips RC6 IR technology. The INF entries for the eHome drivers will have no affect on the RF (Bluetooth) and other non eHome remotes. eHome is the Division of Microsoft that developed the IR remotes for Windows Media Center.
![]() |
![]() |
|
IR Emitter controls Set Top Box or Satellite Receiver IR Emitter also known as IR Blaster IR emitter at the end of a long wire that plugs to the back of the eHome IR Transceiver. The IR emitter is placed at the IR receiver of the Set Top Box. |
Back of the HP Tranceiver |
There are several articles on the Internet for setting up Media Center and the IR Blasters. Such as:
“Media Center and your set-top box”
http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
“How to Use Dual Set-top Boxes in Windows XP Media Center Edition 2005”
http://www.microsoft.com/windowsxp/using/mce/expert/bowman_dualtuners.mspx
“Set up a TV signal in Windows Media Center”
http://windowshelp.microsoft.com/Windows/en-US/help/589879da-b5a9-4e8f-b43c-c5eb99290e8d1033.mspx
Note, the URLs above may change, so I included the titles with which you can search for articles.
Please note that the tables in this section may not translate well to the formatting of this page. The original tables are availble for download as a PDF here or at the bottom of this guide.
IR Codes for “ReportMappingTable” value. Not all Xbox 360 buttons listed, they are the same as the Media Center Remote.
|
Microsoft Universal Media Remote for Xbox 360 |
|||||
|
Button |
Value |
Button |
Value |
Button |
Value |
|
Power |
0x0C |
Stop |
0x19 |
Menu |
0x24 |
|
Start |
0x0D |
Next trk |
0x1A |
Red B |
0x25 |
|
Info |
0x0F |
Prev trk |
0x1B |
Yellow Y |
0x26 |
|
Ch/Pg + |
0x12 |
Up |
0x1E |
Open / Close |
0x28 |
|
Ch/Pg - |
0x13 |
Down |
0x1F |
Display |
0x4F |
|
Fast Fwd |
0x14 |
Left |
0x20 |
Title |
0x51 |
|
Rewind |
0x15 |
Right |
0x21 |
Silver X |
0x64 |
|
Play |
0x16 |
Select |
0x22 |
Green A |
0x66 |
|
Pause |
0x18 |
Back |
0x23 |
Blue X |
0x68 |
|
|
|
|
|
|
|
|
Media Center Remote |
|||||
|
Button |
Value |
Button |
Value |
Button |
Value |
|
0 (rc only) |
0x00 |
Fwd |
0x14 |
TV (kb only) |
0x46 |
|
1 (rc only) |
0x01 |
Rew |
0x15 |
Music (kb only) |
0x47 |
|
2 (rc only) |
0x02 |
Play |
0x16 |
Recorded TV |
0x48 |
|
3 (rc only) |
0x03 |
Record |
0x17 |
Pictures (kb) |
0x49 |
|
4 (rc only) |
0x04 |
Pause |
0x18 |
Videos (kb) |
0x4A |
|
5 (rc only) |
0x05 |
Stop |
0x19 |
Radio (kb) |
0x50 |
|
6 (rc only) |
0x06 |
Skip |
0x1A |
Videotext (rc) |
0x5A |
|
7 (rc only) |
0x07 |
Replay |
0x1B |
Red (rc) |
0x5B |
|
8 (rc only) |
0x08 |
# (rc only) |
0x1C |
Green (rc) |
0x5C |
|
9 (rc only) |
0x09 |
* (rc only) |
0x1D |
Yellow (rc) |
0x5D |
|
Clear (rc only) |
0x0A |
Up |
0x1E |
Blue (rc) |
0x5E |
|
Enter (rc only) |
0x0B |
Down |
0x1F |
Messenger (kb) |
0x64 |
|
PC Power |
0x0C |
Left |
0x20 |
|
|
|
Green Logo |
0x0D |
Right |
0x21 |
|
|
|
Mute |
0x0E |
OK |
0x22 |
|
|
|
Info |
0x0F |
Back |
0x23 |
|
|
|
Vol + |
0x10 |
DVD Menu |
0x24 |
|
|
|
Vol - |
0x11 |
Live TV |
0x25 |
(rc only) – MS MCE remote |
|
|
Ch/Pg + |
0x12 |
Guide |
0x26 |
|
|
|
Ch/Pg - |
0x13 |
|
|
(kb only) - MS MCE keyboard |
|
|
|
|
|
|
|
|
|
HP Remote |
|||||
|
Button |
Value |
Button |
Value |
Button |
Value |
|
Power |
0x0C |
More Info |
0x0F |
Visualization |
0x32 |
|
|
0x4E |
Aspect |
0x27 |
Slide Show |
0x33 |
|
Eject |
0x34 |
Pictures |
0x49 |
Videos |
0x4A |
|
Music |
0x47 |
Radio |
0x50 |
|
|
|
Other HP Remote buttons are same as the MCE buttons indicated above. |
|||||
The Hexadecimal values above are used within the “ReportMappingTable” value noted on the following page. The “ReportMappingTable” value can be altered by creating a custom INF file or editing the Registry entry. After changing the value must restart Windows or the eHome under USB in Device Manager must be disabled and re-enabled for changes to take affect.
Windows MC Remote settings are installed using the INPUT.INF file.
In registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidIr\Remotes
A binary registry value named “ReportMappingTable” is used to set the functionality of remote buttons.
Seven bytes for each button |
||||||
|
0x00 |
0x00 |
0x00 |
0x00 |
0x00 |
0x00 |
0x00 |
|
A |
B |
C |
D |
E |
F |
G |
|
A to D |
Remote Code (B, C, and D are 0x00 for the MCE, HP and Xbox 360 remotes) |
|
E |
Report Method 0x01 Consumer Controls 0x02 MS Vendor Controls 0x03 Standby Button 0x04 Keyboard (key press event) |
|
F & G |
Data (depends on the reporting method) |
Keyboard Event |
|
|
A to D |
Remote Code |
|
E |
Report Method - 0x04 key press event |
|
F |
Modifier ( 0x00 no modifier )
Bit 1 - CTRL Bit 2 - SHIFT Bit 3 - ALT Bit 4 - WIN Key
CTRL is 1, SHIFT is 2, ALT is 4, and WIN is 8
CTRL 1 (0x01) SHIFT 2 (0x02) CTRL+SHIFT 3 (0x03) ALT 4 (0x04) CTRL+ALT 5 (0x05) SHIFT+ALT 6 (0x06) WIN 8 (0x08) CTRL+WIN 9 (0x09) SHIFT+WIN 10 (0x0A) ALT+WIN 12 (0x0C) |
|
G |
USB HID Usage ID MS document ( translate.pdf ) lists the USB HID Usage IDs document is titled “USB HID to PS/2 Scan Code Translation Table” |
Examples: (Note, the last line in the INF file should not have a comma at the end, these are example lines.)
0x28,0x00,0x00,0x00, 0x04,0x00,0x73, \ ; Function Key 24 to XBox 360 Remote Open button
0x4F,0x00,0x00,0x00, 0x04,0x03,0x1D, \ ; CTRL+SHFT+Z for Zoom to XBox 360 Display button
0x64,0x00,0x00,0x00, 0x04,0x04,0x3D, \ ; ALT+F4 for Exit application to XBox 360 Silver X button
0x51,0x00,0x00,0x00, 0x04,0x09,0x2B, \ ; CTRL+WIN+TAB for Persistent Flip 3D to XBox 360 Title button
0x66,0x00,0x00,0x00, 0x02,0x48,0x00, \ ; Recorded TV to XBox 360 Green A button
Example Remote Method and Data (can get additional MCE Method and Data values from the INPUT.INF file)
|
Remote Report Method and Data |
||
|
Function |
Method |
Data |
|
Recorded TV |
0x02 |
0x48,0x00 |
|
|
|
|
|
F24 Function Key |
0x04 |
0x00,0x73 |
|
CTRL+SHFT+Z (Media Center Zoom) |
0x04 |
0x03,0x1D |
|
ALT+F4 (Close Program) |
0x04 |
0x04,0x3D |
|
CTRL+WIN+TAB (Persistent Flip 3D) |
0x04 |
0x09,0x2B |
Example Keyboard Shortcuts for Windows Vista |
|
|
CTRL+WIN+TAB |
Windows Vista Persistent Flip 3D |
|
CTRL+SHFT+Z |
Media Center Zoom |
|
CTRL+SHIFT+C |
Media Center Toggle Close Caption |
|
CTRL+SHIFT+ENTER |
Launch App Elevated, when running programs |
|
|
|
|
WIN+# |
Run Quick Launch item (where # is the position of the Quick Launch item) |
|
WIN+SPACE |
Bring Sidebar to foreground |
|
WIN+G |
Put focus on Sidebar (same shortcut keys to navigate through gadgets) |
|
SHIFT |
Hold while loading CD/DVD to prevent AutoPlay |
|
|
|
|
WIN+D |
Show Desktop |
|
WIN+E |
Explorer |
|
WIN+R |
Run Dialog |
|
|
|
|
ALT+D |
Select Address Bar |
|
CTRL+SHIFT+ESC |
Task Manager |
|
ALT+F4 |
Close Program |
|
|
|
In the INPUT.INF file approximately half way down is the following line
HKR,"Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","ReportMappingTable",0x00000001,\
and the “ReportMappingTable” for “RC6 based MCE remote” follows that line. Each entry is 7 bytes with the bytes represented in hexadecimal and separated by commas.
Note that the last line of the binary value does not have a comma at the end of the hexadecimal digits. All the hexadecimal digits should end in a comma with exception to the last digit on the last line. The INF lines have comments (start with semi-colon) at the end of the lines. Comments at end of lines are not mandatory. However, the backslash after the hexadecimal digits is mandatory. The backslash indicates the registry entry carries onto the next line, the line continuator.
Do not change the values for other remotes listed in the INPUT.INF file, just the "RC6 based MCE remote". Should not edit the INPUT.INF file, and instead use a custom INF file to change the “ReportMappingTable” entry. Create INF, Right-Click and Install it, then Restart Windows or Disable and then Enable the eHome under USB in Device Manager.
Create a text file and change the file extension to .INF, call it RC6MAP.INF
File contents:
_____________________________________________________________________________________________________________________
[Version]
Signature="$WINDOWS NT$"
[DefaultInstall]
DelReg=Del.Settings
AddReg=Add.Settings
[Del.Settings]
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","ReportMappingTable"
[Add.Settings]
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","ReportMappingTable",0x00000001,\
0x01,0x00,0x00,0x00, 0x04,0x00,0x1e, \ ; 1
0x02,0x00,0x00,0x00, 0x04,0x00,0x1f, \ ; 2
0x03,0x00,0x00,0x00, 0x04,0x00,0x20, \ ; 3
0x04,0x00,0x00,0x00, 0x04,0x00,0x21, \ ; 4
0x05,0x00,0x00,0x00, 0x04,0x00,0x22, \ ; 5
0x06,0x00,0x00,0x00, 0x04,0x00,0x23, \ ; 6
0x07,0x00,0x00,0x00, 0x04,0x00,0x24, \ ; 7
0x08,0x00,0x00,0x00, 0x04,0x00,0x25, \ ; 8
0x09,0x00,0x00,0x00, 0x04,0x00,0x26, \ ;
0x00,0x00,0x00,0x00, 0x04,0x00,0x27, \ ; 0
0x0B,0x00,0x00,0x00, 0x04,0x00,0x28, \ ; return
0x0A,0x00,0x00,0x00, 0x04,0x00,0x29, \ ; escape
0x1D,0x00,0x00,0x00, 0x04,0x02,0x25, \ ; *
0x1C,0x00,0x00,0x00, 0x04,0x02,0x20, \ ; #
0x1F,0x00,0x00,0x00, 0x04,0x00,0x51, \ ; down arrow
0x1E,0x00,0x00,0x00, 0x04,0x00,0x52, \ ; up arrow
0x21,0x00,0x00,0x00, 0x04,0x00,0x4f, \ ; right arrow
0x20,0x00,0x00,0x00, 0x04,0x00,0x50, \ ; left arrow
0x22,0x00,0x00,0x00, 0x04,0x00,0x28, \ ; return
0x4E,0x00,0x00,0x00, 0x01,0x08,0x02, \ ; AC Print
0x0F,0x00,0x00,0x00, 0x01,0x09,0x02, \ ; AC Properties (Details)
0x23,0x00,0x00,0x00, 0x01,0x24,0x02, \ ; AC Back
0x16,0x00,0x00,0x00, 0x01,0xb0,0x00, \ ; AC Media play
0x18,0x00,0x00,0x00, 0x01,0xb1,0x00, \ ; AC Media pause
0x17,0x00,0x00,0x00, 0x01,0xb2,0x00, \ ; AC Media record
0x14,0x00,0x00,0x00, 0x01,0xb3,0x00, \ ; AC FF
0x15,0x00,0x00,0x00, 0x01,0xb4,0x00, \ ; AC RW
0x1A,0x00,0x00,0x00, 0x01,0xb5,0x00, \ ; AC Media next track
0x1B,0x00,0x00,0x00, 0x01,0xb6,0x00, \ ; AC Media previous track
0x19,0x00,0x00,0x00, 0x01,0xb7,0x00, \ ; AC Media Stop
0x6E,0x00,0x00,0x00, 0x01,0xcd,0x00, \ ; AC Media play/pause
0x10,0x00,0x00,0x00, 0x01,0xe9,0x00, \ ; AC volume up
0x11,0x00,0x00,0x00, 0x01,0xea,0x00, \ ; AC volume down
0x0E,0x00,0x00,0x00, 0x01,0xe2,0x00, \ ; AC volume mute
0x26,0x00,0x00,0x00, 0x01,0x8d,0x00, \ ; AC select program guide
0x12,0x00,0x00,0x00, 0x01,0x9c,0x00, \ ; AC channel up
0x13,0x00,0x00,0x00, 0x01,0x9d,0x00, \ ; AC channel down
0x0C,0x00,0x00,0x00, 0x03,0x82,0x00, \ ; Suspend
0x2A,0x00,0x00,0x00, 0x03,0x82,0x00, \ ; Discrete Power Off
0x28,0x00,0x00,0x00, 0x04,0x00,0x73, \ ; Function Key 24 to XBox 360 Remote Open button
0x4F,0x00,0x00,0x00, 0x04,0x03,0x1D, \ ; CTRL+SHFT+Z for Zoom to XBox 360 Display button
0x64,0x00,0x00,0x00, 0x04,0x04,0x3D, \ ; ALT+F4 for Exit application to XBox 360 Silver X button
0x51,0x00,0x00,0x00, 0x04,0x09,0x2B, \ ; CTRL+WIN+TAB for Persistent Flip 3D to XBox 360 Title button
0x66,0x00,0x00,0x00, 0x02,0x48,0x00, \ ; Recorded TV to XBox 360 Green A button
0x68,0x00,0x00,0x00, 0x04,0x08,0x00 \ ; WIN key for Start Menu to XBox 360 Blue X button <-– note no comma after last hex digits on last line
_____________________________________________________________________________________________________________________
Save the INF file, then Right-Click the INF file and choose Install from Right-Click menu.
And don’t forget, the backslashes are mandatory and the last line does not have comma at end of numbers.
Restart Windows or disable/enable the eHome under USB in Device Manager.
By default the eHome IR Receiver works with MCE Remotes only. The Xbox 360 Universal Media remote is not an MCE Remote. To enable the eHome Receiver to work with other RC6 remotes like the Xbox 360, perform either of the following.
1) Create and install an INF file then disable/enable eHome under USB in Device Manager.
or
2) Edit the registry then disable/enable eHome under USB in Device Manager.
1) Create and Install an INF file and disable/enable the eHome under USB:
Create a text file and change the file extension to .INF, call it MCALLRC6.INF
File contents:
_____________________________________________________________________________________________________________________
[Version]
Signature="$WINDOWS NT$"
[DefaultInstall]
DelReg=Del.Settings
AddReg=Add.Settings
[Del.Settings]
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","CodeSetNum0"
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","CodeSetNum1"
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","CodeSetNum2"
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","CodeSetNum3"
[Add.Settings]
HKLM,"SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da","CodeSetNum0",0x00010001,0x0
_____________________________________________________________________________________________________________________
Save the INF file, then Right-Click the INF file and choose Install from Right-Click menu.
Restart Windows or disable/enable the eHome under USB in Device Manager.
2) Edit the Registry and disable/enable the eHome under USB:
Under the following key:
HKLM\SYSTEM\CurrentControlSet\Services\HidIr\Remotes\745a17a0-74d3-11d0-b6fe-00a0c90f57da
Delete the values CodeSetNum1, CodeSetNum2, and CodeSetNum3.
Then change CodeSetNum0 to 0 (zero).
Do not alter other remotes, just the “745a17a0-74d3-11d0-b6fe-00a0c90f57da” key.
Restart Windows or disable/enable the eHome under USB in Device Manager.
The text on this page is from the article “Use a remote control with Windows Media Center” on the “windowshelp.microsoft.com” website. The More button on the MCE Remote is equivalent to the Info button on the Xbox 360 and HP remotes.
Entering Text with the Remote
To enter text using the remote control, press a number repeatedly to scroll through the choices that are available for that number. With each repeated press of a number, a different character appears. When you find the character that you want, press the ENTER button on the remote control. For example, if you are a fan of cooking shows, you can search the Guide by keyword for "food" by doing the following:
For letters and numbers, use the button corresponding to the letter or number you want.
1. Press the number 3 three times for the letter "f", and then press ENTER.
2. Press the number 6 three times for the letter "o", and then press ENTER.
3. Press the number 6 three times for the letter "o", and then press ENTER.
4. Press the number 3 one time for the letter "d", and then press ENTER.
Sometimes you do not have to enter every letter of every word into your keyword search. The list of possible choices appears after the third letter.
You can also do the following:
To switch between character sets such as uppercase, lowercase, and symbol modes, press the CH/PG+ or CH/PG- button on the remote control.
To backspace, press the CLEAR button on the remote control.
To enter a space between words, press the (0) button on the remote control.
When you press the MORE button on the remote control, a list displays in Windows Media Center of additional options to choose from. The options that are available depend on your selection on the screen. For example, if you select a picture, and then press the MORE button on the remote, you will get the following options: Picture Details, Rotate, Burn, and Settings.
You can access Settings from anywhere in Windows Media Center by pressing the MORE button on the remote control.
To dismiss the list of options without making a selection, press the BACK button on the remote control, press the ESC button on the keyboard, or click the screen outside the list by using the mouse.
By default the volume buttons control the PC’s volume, but can be changed using the remote’s learning feature.
By default the TV button has no function, but can be changed using the remote’s learning feature. The TV button is for turning a TV on and off, for when the Media Center PCi is attached to a television.
For information on using the MCE Remote’s learning feature see the Remote’s manual. The Remote’s manual is downloadable on the Internet as the MCE_Remote_Manual.pdf file. The MCE Remote Keyboard also has a learning feature covered in the MCE_Keyboard.pdf file. When searching for the files, note the underscore characters in both PDF file names. For programming the Xbox 360 Universal Remote see the na-uniremote.pdf file.
Forums at The Green Button (www.thegreenbutton.com)
Microsoft MSDN and windowshelp.microsoft.com
Download translate.pdf file:
Myself (Shane Kent, a.k.a. Shakey from my DEC-MS logon v-shake)
| Attachment | Size |
|---|---|
| remotes_title.jpg | 280.96 KB |
| eHome_transceiver.jpg | 199.33 KB |
| hp_remote.jpg | 196.68 KB |
| gyration_remote.jpg | 232.35 KB |
| xbox_360_remote.jpg | 128.42 KB |
| MCE_IR_Keyboard.jpg | 248.11 KB |
| MS_Entertainment_Desktop.jpg | 357.02 KB |
| IR_Emitter.jpg | 47.49 KB |
| IR_Emitter_Port.jpg | 87.87 KB |
| IRCodes_ReportMappingTable_InputINF.pdf | 140.79 KB |